HomeStore
1970s Mosrite Ventures Model “Avenger” Vintage Electric Guitar White w/ Moseley Vibrato, Firstman Japan
1970s Mosrite Ventures Model “Avenger” Vintage Electric Guitar White w/ Moseley Vibrato, Firstman Japan
Up for sale, a 1970s Firstman Mosrite Ventures Model “Avenger” in 100% original condition and in perfect working order. A continuation of the Ventures Model legacy, this guitar follows the stylings of the 1960s USA Mosrites, but was produced in Japan in the '70s as a result of an agreement between Semie Moseley and the Firstman company. It effectively captures the finer points of classic Mosrite design with a Moseley vibrato tailpiece, “Mosrite”-stamped pickup covers, smooth knobs, and German Carve on the basswood body.
The stock pair of stock single coil pickups are snappy and sparkling, not as overwound as some, yet still providing a bold, distinct sound in every pickup position. Metering just shy of 6k ohms, there are chewy, snappy bridge pickup tones on tap, and fatter sounds in the neck position, with an authoritative treble zing that's quintessential Mosrite.This Mosrite weighs 8lbs 10oz, professionally setup here at Mike & Mike’s Guitar Bar with 10-46 strings, low action, and accurate intonation.
Neck Specs:
-Wood: Maple
-Shape: Slender C, measuring .795” 1st fret, .900” 12th fret
-Fretboard: Rosewood, mini dot inlay
-Frets: Slender, leveled/crowned, faint wear on frets 1-3
-Scale Length: 24 3/4”
-Nut: 1.650” (42mm), bone, zero fret
-Tuners: Cast/sealed
-Factory Markings: “Made in Japan” (neck plate)
Body Specs:
-Wood: Basswood
-Pickups: Single coil x2 (both 5.8k ohms)
-Controls: Volume, Tone, Three-way pickup selector
-Harness: Full-size 500K Japanese pots
-Hardware: Moseley vibrato, skirted knobs (chrome-plated)
-Plastics: Three-ply black pickguard, “baton” switch tip, “Mosrite”-stamped pickup covers
The gloss White finish exhibits uniform yellowing and some vertical checking (particularly at the lower bout), with light buckle scuffing on the back, a finish chip of note on the bass-side lower bout edge, and some more restrained dings and nicks on the rest of the body. The gloss on the neck profile is smooth to the palm, with a handful of shallow nicks.
A gigbag is included.
The stock pair of stock single coil pickups are snappy and sparkling, not as overwound as some, yet still providing a bold, distinct sound in every pickup position. Metering just shy of 6k ohms, there are chewy, snappy bridge pickup tones on tap, and fatter sounds in the neck position, with an authoritative treble zing that's quintessential Mosrite.This Mosrite weighs 8lbs 10oz, professionally setup here at Mike & Mike’s Guitar Bar with 10-46 strings, low action, and accurate intonation.
Neck Specs:
-Wood: Maple
-Shape: Slender C, measuring .795” 1st fret, .900” 12th fret
-Fretboard: Rosewood, mini dot inlay
-Frets: Slender, leveled/crowned, faint wear on frets 1-3
-Scale Length: 24 3/4”
-Nut: 1.650” (42mm), bone, zero fret
-Tuners: Cast/sealed
-Factory Markings: “Made in Japan” (neck plate)
Body Specs:
-Wood: Basswood
-Pickups: Single coil x2 (both 5.8k ohms)
-Controls: Volume, Tone, Three-way pickup selector
-Harness: Full-size 500K Japanese pots
-Hardware: Moseley vibrato, skirted knobs (chrome-plated)
-Plastics: Three-ply black pickguard, “baton” switch tip, “Mosrite”-stamped pickup covers
The gloss White finish exhibits uniform yellowing and some vertical checking (particularly at the lower bout), with light buckle scuffing on the back, a finish chip of note on the bass-side lower bout edge, and some more restrained dings and nicks on the rest of the body. The gloss on the neck profile is smooth to the palm, with a handful of shallow nicks.
A gigbag is included.
$560.00
Original: $1,599.99
-65%1970s Mosrite Ventures Model “Avenger” Vintage Electric Guitar White w/ Moseley Vibrato, Firstman Japan—
$1,599.99
$560.00
Description
Up for sale, a 1970s Firstman Mosrite Ventures Model “Avenger” in 100% original condition and in perfect working order. A continuation of the Ventures Model legacy, this guitar follows the stylings of the 1960s USA Mosrites, but was produced in Japan in the '70s as a result of an agreement between Semie Moseley and the Firstman company. It effectively captures the finer points of classic Mosrite design with a Moseley vibrato tailpiece, “Mosrite”-stamped pickup covers, smooth knobs, and German Carve on the basswood body.
The stock pair of stock single coil pickups are snappy and sparkling, not as overwound as some, yet still providing a bold, distinct sound in every pickup position. Metering just shy of 6k ohms, there are chewy, snappy bridge pickup tones on tap, and fatter sounds in the neck position, with an authoritative treble zing that's quintessential Mosrite.This Mosrite weighs 8lbs 10oz, professionally setup here at Mike & Mike’s Guitar Bar with 10-46 strings, low action, and accurate intonation.
Neck Specs:
-Wood: Maple
-Shape: Slender C, measuring .795” 1st fret, .900” 12th fret
-Fretboard: Rosewood, mini dot inlay
-Frets: Slender, leveled/crowned, faint wear on frets 1-3
-Scale Length: 24 3/4”
-Nut: 1.650” (42mm), bone, zero fret
-Tuners: Cast/sealed
-Factory Markings: “Made in Japan” (neck plate)
Body Specs:
-Wood: Basswood
-Pickups: Single coil x2 (both 5.8k ohms)
-Controls: Volume, Tone, Three-way pickup selector
-Harness: Full-size 500K Japanese pots
-Hardware: Moseley vibrato, skirted knobs (chrome-plated)
-Plastics: Three-ply black pickguard, “baton” switch tip, “Mosrite”-stamped pickup covers
The gloss White finish exhibits uniform yellowing and some vertical checking (particularly at the lower bout), with light buckle scuffing on the back, a finish chip of note on the bass-side lower bout edge, and some more restrained dings and nicks on the rest of the body. The gloss on the neck profile is smooth to the palm, with a handful of shallow nicks.
A gigbag is included.
The stock pair of stock single coil pickups are snappy and sparkling, not as overwound as some, yet still providing a bold, distinct sound in every pickup position. Metering just shy of 6k ohms, there are chewy, snappy bridge pickup tones on tap, and fatter sounds in the neck position, with an authoritative treble zing that's quintessential Mosrite.This Mosrite weighs 8lbs 10oz, professionally setup here at Mike & Mike’s Guitar Bar with 10-46 strings, low action, and accurate intonation.
Neck Specs:
-Wood: Maple
-Shape: Slender C, measuring .795” 1st fret, .900” 12th fret
-Fretboard: Rosewood, mini dot inlay
-Frets: Slender, leveled/crowned, faint wear on frets 1-3
-Scale Length: 24 3/4”
-Nut: 1.650” (42mm), bone, zero fret
-Tuners: Cast/sealed
-Factory Markings: “Made in Japan” (neck plate)
Body Specs:
-Wood: Basswood
-Pickups: Single coil x2 (both 5.8k ohms)
-Controls: Volume, Tone, Three-way pickup selector
-Harness: Full-size 500K Japanese pots
-Hardware: Moseley vibrato, skirted knobs (chrome-plated)
-Plastics: Three-ply black pickguard, “baton” switch tip, “Mosrite”-stamped pickup covers
The gloss White finish exhibits uniform yellowing and some vertical checking (particularly at the lower bout), with light buckle scuffing on the back, a finish chip of note on the bass-side lower bout edge, and some more restrained dings and nicks on the rest of the body. The gloss on the neck profile is smooth to the palm, with a handful of shallow nicks.
A gigbag is included.
