HomeStore
2015 Gibson Memphis ES-330L Humbucker Fully Hollow Thinline Guitar Ebony w/ MHS PAF Humbuckers, CoA & Case
2015 Gibson Memphis ES-330L Humbucker Fully Hollow Thinline Guitar Ebony w/ MHS PAF Humbuckers, CoA & Case
Up for sale, a 2015 Gibson Memphis ES-330L Humbucker in excellent condition and in perfect working order, complete with the original hardshell case and CoA. A short-lived, discontinued model crafted at Gibson’s lauded and now shuttered Memphis, TN factory, the ES-330L features thinline fully hollow construction paired with a Long Neck joint (19 frets clear of the body, “L” in the model designation) for easy access to the upper registers of the fretboard. Whether you call it a “Long Neck” ES-330 or a fully hollow ES-335, it’s a decidedly unique amalgamation of ES-330 and ES-335 spec for a best-of-both-worlds instrument.
Loaded with a pair of MHS (Memphis Historic Spec) PAF-style humbuckers and a Bigsby B7 vibrato, this particular ES-330L is 100% original save for a replacement Schaller GTM bridge with nylon saddles (original bridge included). Lightweight at 6lbs 10oz, this ES-330L has a prodigious, well-defined natural acoustic response via the maple hollowbody construction. The MHS handwound (scatterwound) humbuckers deliver tight low end, a complex, tailored midrange, and sweet highs, consistent with Gibson's golden age PAF pickups. A lower wind PAF designed specifically for Gibson’s hollow and semi-hollow instruments, the MHS pickups balance both exquisite clarity and rich growl, with a slightly hotter Alnico II bridge position and a sweet and smooth-sounding Alnico III neck position humbucker that has great bloom and complex harmonic content. This Gibson ES-330L has been professionally setup here at Mike & Mike’s Guitar Bar with 11-49 strings, low action, and accurate intonation.
Neck Specs:
-Wood: Mahogany
-Shape: Rounded C, measuring .860” 1st fret, .975” 12th fret
-Joint: Mortise and long tenon, hot hide glue, “Long Neck” 19th fret joint
-Fretboard: Rosewood, celluloid small block inlays, rolled binding
-Frets: Medium jumbo, no wear
-Scale Length: 24 3/4”
-Nut: 1 11/16”
-Tuners: Kluson Deluxe single-line, double-ring
-Headstock: F hole truss rod cover
-Serialization: 5-prefix stamp
Body Specs:
-Wood: Maple
-Pickups: MHS humbucker x2
-Controls: Volume x2, Tone x2, Three-way pickup selector
-Hardware: Schaller GTM tune-o-matic bridge (replacement, original No-wire ABR-1 bridge included) Bigbsy B7 vibrato
-Plastics: Five-ply black pickguard, reflector cap knobs, cream switch tip
The gloss Ebony nitro lacquer finish shows only a couple small dings on the bass-side of the back and some faint scratches in the clear coat. The smooth nitro gloss on the neck profile is flawless.
The original hardshell case is included, along with the serialized CoA and original bridge.
Loaded with a pair of MHS (Memphis Historic Spec) PAF-style humbuckers and a Bigsby B7 vibrato, this particular ES-330L is 100% original save for a replacement Schaller GTM bridge with nylon saddles (original bridge included). Lightweight at 6lbs 10oz, this ES-330L has a prodigious, well-defined natural acoustic response via the maple hollowbody construction. The MHS handwound (scatterwound) humbuckers deliver tight low end, a complex, tailored midrange, and sweet highs, consistent with Gibson's golden age PAF pickups. A lower wind PAF designed specifically for Gibson’s hollow and semi-hollow instruments, the MHS pickups balance both exquisite clarity and rich growl, with a slightly hotter Alnico II bridge position and a sweet and smooth-sounding Alnico III neck position humbucker that has great bloom and complex harmonic content. This Gibson ES-330L has been professionally setup here at Mike & Mike’s Guitar Bar with 11-49 strings, low action, and accurate intonation.
Neck Specs:
-Wood: Mahogany
-Shape: Rounded C, measuring .860” 1st fret, .975” 12th fret
-Joint: Mortise and long tenon, hot hide glue, “Long Neck” 19th fret joint
-Fretboard: Rosewood, celluloid small block inlays, rolled binding
-Frets: Medium jumbo, no wear
-Scale Length: 24 3/4”
-Nut: 1 11/16”
-Tuners: Kluson Deluxe single-line, double-ring
-Headstock: F hole truss rod cover
-Serialization: 5-prefix stamp
Body Specs:
-Wood: Maple
-Pickups: MHS humbucker x2
-Controls: Volume x2, Tone x2, Three-way pickup selector
-Hardware: Schaller GTM tune-o-matic bridge (replacement, original No-wire ABR-1 bridge included) Bigbsy B7 vibrato
-Plastics: Five-ply black pickguard, reflector cap knobs, cream switch tip
The gloss Ebony nitro lacquer finish shows only a couple small dings on the bass-side of the back and some faint scratches in the clear coat. The smooth nitro gloss on the neck profile is flawless.
The original hardshell case is included, along with the serialized CoA and original bridge.
$4,699.99
2015 Gibson Memphis ES-330L Humbucker Fully Hollow Thinline Guitar Ebony w/ MHS PAF Humbuckers, CoA & Case—
$4,699.99
Description
Up for sale, a 2015 Gibson Memphis ES-330L Humbucker in excellent condition and in perfect working order, complete with the original hardshell case and CoA. A short-lived, discontinued model crafted at Gibson’s lauded and now shuttered Memphis, TN factory, the ES-330L features thinline fully hollow construction paired with a Long Neck joint (19 frets clear of the body, “L” in the model designation) for easy access to the upper registers of the fretboard. Whether you call it a “Long Neck” ES-330 or a fully hollow ES-335, it’s a decidedly unique amalgamation of ES-330 and ES-335 spec for a best-of-both-worlds instrument.
Loaded with a pair of MHS (Memphis Historic Spec) PAF-style humbuckers and a Bigsby B7 vibrato, this particular ES-330L is 100% original save for a replacement Schaller GTM bridge with nylon saddles (original bridge included). Lightweight at 6lbs 10oz, this ES-330L has a prodigious, well-defined natural acoustic response via the maple hollowbody construction. The MHS handwound (scatterwound) humbuckers deliver tight low end, a complex, tailored midrange, and sweet highs, consistent with Gibson's golden age PAF pickups. A lower wind PAF designed specifically for Gibson’s hollow and semi-hollow instruments, the MHS pickups balance both exquisite clarity and rich growl, with a slightly hotter Alnico II bridge position and a sweet and smooth-sounding Alnico III neck position humbucker that has great bloom and complex harmonic content. This Gibson ES-330L has been professionally setup here at Mike & Mike’s Guitar Bar with 11-49 strings, low action, and accurate intonation.
Neck Specs:
-Wood: Mahogany
-Shape: Rounded C, measuring .860” 1st fret, .975” 12th fret
-Joint: Mortise and long tenon, hot hide glue, “Long Neck” 19th fret joint
-Fretboard: Rosewood, celluloid small block inlays, rolled binding
-Frets: Medium jumbo, no wear
-Scale Length: 24 3/4”
-Nut: 1 11/16”
-Tuners: Kluson Deluxe single-line, double-ring
-Headstock: F hole truss rod cover
-Serialization: 5-prefix stamp
Body Specs:
-Wood: Maple
-Pickups: MHS humbucker x2
-Controls: Volume x2, Tone x2, Three-way pickup selector
-Hardware: Schaller GTM tune-o-matic bridge (replacement, original No-wire ABR-1 bridge included) Bigbsy B7 vibrato
-Plastics: Five-ply black pickguard, reflector cap knobs, cream switch tip
The gloss Ebony nitro lacquer finish shows only a couple small dings on the bass-side of the back and some faint scratches in the clear coat. The smooth nitro gloss on the neck profile is flawless.
The original hardshell case is included, along with the serialized CoA and original bridge.
Loaded with a pair of MHS (Memphis Historic Spec) PAF-style humbuckers and a Bigsby B7 vibrato, this particular ES-330L is 100% original save for a replacement Schaller GTM bridge with nylon saddles (original bridge included). Lightweight at 6lbs 10oz, this ES-330L has a prodigious, well-defined natural acoustic response via the maple hollowbody construction. The MHS handwound (scatterwound) humbuckers deliver tight low end, a complex, tailored midrange, and sweet highs, consistent with Gibson's golden age PAF pickups. A lower wind PAF designed specifically for Gibson’s hollow and semi-hollow instruments, the MHS pickups balance both exquisite clarity and rich growl, with a slightly hotter Alnico II bridge position and a sweet and smooth-sounding Alnico III neck position humbucker that has great bloom and complex harmonic content. This Gibson ES-330L has been professionally setup here at Mike & Mike’s Guitar Bar with 11-49 strings, low action, and accurate intonation.
Neck Specs:
-Wood: Mahogany
-Shape: Rounded C, measuring .860” 1st fret, .975” 12th fret
-Joint: Mortise and long tenon, hot hide glue, “Long Neck” 19th fret joint
-Fretboard: Rosewood, celluloid small block inlays, rolled binding
-Frets: Medium jumbo, no wear
-Scale Length: 24 3/4”
-Nut: 1 11/16”
-Tuners: Kluson Deluxe single-line, double-ring
-Headstock: F hole truss rod cover
-Serialization: 5-prefix stamp
Body Specs:
-Wood: Maple
-Pickups: MHS humbucker x2
-Controls: Volume x2, Tone x2, Three-way pickup selector
-Hardware: Schaller GTM tune-o-matic bridge (replacement, original No-wire ABR-1 bridge included) Bigbsy B7 vibrato
-Plastics: Five-ply black pickguard, reflector cap knobs, cream switch tip
The gloss Ebony nitro lacquer finish shows only a couple small dings on the bass-side of the back and some faint scratches in the clear coat. The smooth nitro gloss on the neck profile is flawless.
The original hardshell case is included, along with the serialized CoA and original bridge.
